There is not a single thing more irritating than a battery difficulty. You forgot the lights on or there is a internal difficulty and your Perodua model MyVi battery is lifeless! Not very opportune when you have activities to complete.
Hopefully, the battery replacement action is easy and the only genuine trouble is procuring the most suitable battery for your Perodua model MyVi.
The battery substitution is very painless and it requires only three simple steps!
If you want to discover the perfect battery for your Perodua model MyVi here a couple of suggestions that you can look for on Amazon, a respected website
- BUY ONLY GENUINE APC PRODUCTS! For genuine APC by Schneider Electric Products from the manufacturer, buy only if the product says "Ships from and sold by Amazon.com"
- Genuine APC replacement battery cartridges (RBC) are tested and certified for compatibility to restore UPS performance to the original specifications.
- Includes all required connectors, Battery recycling guide, Installation guide, Reusable packaging. Operating temperature-0° - 40 °C
- RBC 17 is compatible with many APC models including BE650BB, BE650G, BE650R, BE725BB, BE750G, BN600, BP700UC, DL650T, DL725VT and more. See product page for complete list.
- Note: Kindly refer the User Manual before use.Storage Temperature -15 - 45 °C
- CR 2032 replacement battery
- Easy to install
- Re-programming is not required
- 2 Pack
- Blister packaged to ensure battery remains fresh
- 90 day warranty - We test every remote and key fob to make sure it is functioning perfectly before it leaves our USA warehouse. We are so confident that we offer an Industry Leading 1 warranty on our keyless entry remote and key fob replacements. Why pay full retail for a new OEM key fob replacement when you can get ours at a fraction of the cost.
- This is Just a replacement shell for Toyota remotes that have Fcc#Hyq12bdm or Hyq12bel. (Electrics not included)
- PURCHASE WITH CONFIDENCE: No one knows Keyless entry & replacement Key Fob better than us. With over 250,000 remotes and happy customers and counting you can buy with confidence knowing you are getting the right part for you car. We also offer FREE USA based tech support with every order, if you have any questions we are here to help.
- Includes New Duracell battery inside!! Fits Fcc#Hyq12bdm or Hyq12bel.
- Compatibility: This Replacement Shell will fit remotes that fit 2012-2017 Toyota Camry Remote Key, 2014-2017 Toyota Corolla Remote Key
- Thoroughly engineered to meet or exceed your expectations for fit, form, and function
- Provides the performance and dependability you expect from ACDelco
- CR 2025 replacement battery
- Easy to install
- Re-programming is not required
- 5 Pack
- Blister packaged to ensure battery remains fresh
- Jumper cable for 12V Portable charger, Built-in 200Amp Fuse Protection
- Wire: 10 AWG silicone 0.08/1050 O.D. 5.0 Red Black; EC5 Male plastic shell blue, fits 5mm Banana plug.
- Replacement jump box cables, fits most brands of mini portable jump boxes, mobile chargers
- Use of car jump starter: 1)- connect the red battery clamp of jumper cable to the vehicle's positive (+) battery and connect the black to the negative (-) pole, 2)- Plug the cord of jumper cable into the jumper starter's socket, 3) - and start the vehicle
- Cautions: Do not reverse the operation sequence of jump starter; Do not use jump starter to start vehicle if the number of battery indicators are less then 3 to protect the jump starter from damage; Do remove the product from vehicle within 30 seconds after vehicle is started, or it may cause security incidents.
- Vinyl coated steel clamps
- Handle length is about 7-inches
- Conductors are copper plated steel
- For use with 6 and 12-volt batteries
- Recommended for 4,6, or 8 gauge cables
- Fully tested complete remote head key with a battery installed, tech support included with your purchase
- User programmable, step by step instructions included, two existing original keys are required If two existing original keys are not present or working dealer or locksmith programming is required
- Replaces OHT692427AA, KOBDT04A small and large button style keys
- KeylessOption warranty card Included with each purchase
- This is a replacement part to match the original in form and function
- Replacement jump box cables, fits most brands of mini portable jump boxes, car jump portable starters and mobile chargers.
- Support up to: 20000mAh Power bank at 600Amp Current. (
- Strong Alligator Clamp Clip with EC5 Plug Connector. Input/output: 12V. Wire guage:1015 10AWG.
- Use of car jump starter: 1)- connect the red battery clamp of jumper cable to the vehicle's positive (+) battery and connect the black to the negative (-) pole; 2)- Plug the cord of jumper cable into the jumper starter's socket; 3) - and start the vehicle.
- PAY ATTENTION PLEASE. When using this item, please be careful when using, this item can NOT be overload, check your device power before using please. Note: Please check your power bank if it can support your car.
Just after selecting your next battery, observe these next guidelines and you will definitely be fine again with your car
Prior to replacement of your battery, shall we remind you to park the car in a super stable place, emergency break on and be clear that the engine is off!
1 – Remove the battery wires
The battery is found under the hood of your automobile. Pull out the hood release lever located on the driver side. Soon after you get access to the battery, you will certainly notice that now there is two cable connections over it. Be careful, there is one positive cable and one negative cable. You have to bear in mind where these were positioned in or you will be in trouble when setting back the brand-new battery on your car.
2 – Detach the previous battery of your Perodua model MyVi
Disassembling the old deceased battery from your car should not be a trouble. As soon all cables are removed, just detach the former battery and there you go. Be attentive simply because batteries can be very heavy. If you aren’t convinced about your muscle, help could be enjoyable.
If you find out some dust or any sort of different impurities, grab a cloth and keep clean the battery’s holder to avoid any sort of difficulty for the upcoming point
3 – Set up the latest battery on your Perodua model MyVi
If you accomplished techniques perfectly, you will remember the old and unwanted battery location. Set up the brand-new battery in the same location and put the positive cable on the corresponding place and same for the negative cable.
Now your car should be working like the first day!
Soon after your battery is removed, don’t put the previous battery in the garbage or in the outdoors! This car product is seriously toxic and it will be damageable for the environnement. Go recycling the battery or perhaps take it back again in a garage!
Last update on 2019-02-22 / Affiliate links / Images from Amazon Product Advertising API