How to replace your Excalibur Series IV battery

0

Undoubtedly certainly nothing more depressing than a battery concern. You forgot the lights on or there is a intrinsic concern and your Excalibur model Series IV battery is dead! Not very practical in the event that you have tasks to do.
Hopefully, the battery replacement operation is pain-free and the sole actual problem is choosing the ideal battery for your Excalibur model Series IV.

The battery substitution is very convenient and it needs only three basic steps!

If you desire to get the best battery for your Excalibur model Series IV here a couple of suggestions that you are going to find on Amazon, a well known website

After choosing your next battery, stick with these following methods and you will certainly be ready to go again with your car

Just before replacing your battery, let us remind you to park your vehicle in a super stable place, emergency break on and be assured that the engine is off!

1 – Disconnect the battery cables and wires

The battery is installed under the hood of your vehicle. Pull the hood release lever located on the driver area. Now that you access to the battery, you are going to detect that now there is two cable connections within it. Be attentive, there is one positive cable and one negative cable. You have to remember where these were positioned in or you will be in trouble while placing back the fresh new battery on your car.

2 – Take off the older battery of your Excalibur model Series IV

Taking out the old flat battery from your car might not be a trouble. Immediately after all cables are taken out, just remove the old battery and there you go. Be cautious due to the fact that batteries can be highly heavy. If you are certainly not assured about your strength, support would be enjoyable.

In the event that you find some dirt or any other pollutants, seize a cloth and remove the battery’s holder to avoid any kind of concerns for the following step

Change battery on Excalibur Series IV

3 – Add the fresh new battery on your Excalibur model Series IV

In the case you achieved details well, you will definitely keep in mind the old and unwanted battery location. Set up the new battery in the actual same location and connect the positive cable on the matching place and then similar thing for the negative cable.

Now your car should be working like the first day!

Now that your battery is removed, don’t put the old battery in the trash or in the outdoors! This car part is extremely harmful and it will likely be damageable for the environnement. Go recycling your battery or perhaps take it back in a garage!

Last update on 2019-02-22 / Affiliate links / Images from Amazon Product Advertising API

You might also like

Leave A Reply

Your email address will not be published.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More