You’ll find certainly nothing more depressing than a battery situation. You neglect the lights on or there is a inner situation and your Peugeot model 402 battery is gone! Not very convenient when you have things to achieve.
Lucky you , the battery substitution procedure is manageable and the one serious problem is finding the best battery for your Peugeot model 402.
The battery change is very simple and it will take you only three steps!
If you wish to obtain the ideal battery for your Peugeot model 402 here a couple of recommendations that you are likely to discover on Amazon, a well known website
- BUY ONLY GENUINE APC PRODUCTS! For genuine APC by Schneider Electric Products from the manufacturer, buy only if the product says "Ships from and sold by Amazon.com"
- Genuine APC replacement battery cartridges (RBC) are tested and certified for compatibility to restore UPS performance to the original specifications.
- Includes all required connectors, Battery recycling guide, Installation guide, Reusable packaging. Operating temperature-0° - 40 °C
- RBC 17 is compatible with many APC models including BE650BB, BE650G, BE650R, BE725BB, BE750G, BN600, BP700UC, DL650T, DL725VT and more. See product page for complete list.
- Note: Kindly refer the User Manual before use.Storage Temperature -15 - 45 °C
- CR 2032 replacement battery
- Easy to install
- Re-programming is not required
- 2 Pack
- Blister packaged to ensure battery remains fresh
- 90 day warranty - We test every remote and key fob to make sure it is functioning perfectly before it leaves our USA warehouse. We are so confident that we offer an Industry Leading 1 warranty on our keyless entry remote and key fob replacements. Why pay full retail for a new OEM key fob replacement when you can get ours at a fraction of the cost.
- This is Just a replacement shell for Toyota remotes that have Fcc#Hyq12bdm or Hyq12bel. (Electrics not included)
- PURCHASE WITH CONFIDENCE: No one knows Keyless entry & replacement Key Fob better than us. With over 250,000 remotes and happy customers and counting you can buy with confidence knowing you are getting the right part for you car. We also offer FREE USA based tech support with every order, if you have any questions we are here to help.
- Includes New Duracell battery inside!! Fits Fcc#Hyq12bdm or Hyq12bel.
- Compatibility: This Replacement Shell will fit remotes that fit 2012-2017 Toyota Camry Remote Key, 2014-2017 Toyota Corolla Remote Key
- Thoroughly engineered to meet or exceed your expectations for fit, form, and function
- Provides the performance and dependability you expect from ACDelco
- CR 2025 replacement battery
- Easy to install
- Re-programming is not required
- 5 Pack
- Blister packaged to ensure battery remains fresh
- Jumper cable for 12V Portable charger, Built-in 200Amp Fuse Protection
- Wire: 10 AWG silicone 0.08/1050 O.D. 5.0 Red Black; EC5 Male plastic shell blue, fits 5mm Banana plug.
- Replacement jump box cables, fits most brands of mini portable jump boxes, mobile chargers
- Use of car jump starter: 1)- connect the red battery clamp of jumper cable to the vehicle's positive (+) battery and connect the black to the negative (-) pole, 2)- Plug the cord of jumper cable into the jumper starter's socket, 3) - and start the vehicle
- Cautions: Do not reverse the operation sequence of jump starter; Do not use jump starter to start vehicle if the number of battery indicators are less then 3 to protect the jump starter from damage; Do remove the product from vehicle within 30 seconds after vehicle is started, or it may cause security incidents.
- Vinyl coated steel clamps
- Handle length is about 7-inches
- Conductors are copper plated steel
- For use with 6 and 12-volt batteries
- Recommended for 4,6, or 8 gauge cables
- Fully tested complete remote head key with a battery installed, tech support included with your purchase
- User programmable, step by step instructions included, two existing original keys are required If two existing original keys are not present or working dealer or locksmith programming is required
- Replaces OHT692427AA, KOBDT04A small and large button style keys
- KeylessOption warranty card Included with each purchase
- This is a replacement part to match the original in form and function
- Replacement jump box cables, fits most brands of mini portable jump boxes, car jump portable starters and mobile chargers.
- Support up to: 20000mAh Power bank at 600Amp Current. (
- Strong Alligator Clamp Clip with EC5 Plug Connector. Input/output: 12V. Wire guage:1015 10AWG.
- Use of car jump starter: 1)- connect the red battery clamp of jumper cable to the vehicle's positive (+) battery and connect the black to the negative (-) pole; 2)- Plug the cord of jumper cable into the jumper starter's socket; 3) - and start the vehicle.
- PAY ATTENTION PLEASE. When using this item, please be careful when using, this item can NOT be overload, check your device power before using please. Note: Please check your power bank if it can support your car.
After choosing your next battery, follow these next guidelines and you will be good to go back again with your car
Just before replacement of your battery, shall we remind you to park the car in a stable place, emergency break on and be clear that the engine is off!
1 – Detach the battery cable connections
The battery is actually under the hood of your automobile. Stretch the hood release lever placed on the vehicle driver area. Once you get access to the battery, you should see that there is two cable connections in there. Be very careful, there is one positive cable and one negative cable. You have to remember where these were positioned in or you will definitely be in stress when positioning back the new battery on your car.
2 – Take away the ancient battery of your Peugeot model 402
Taking away the old lifeless battery from your car will not be a difficulty. Soon after all cables are detached, just grab the former battery and that’s it. Be aware because batteries can be highly weighty. If you aren’t sure about your power, support will be sweet.
In cases where you see some particles or any other pollutants, grab a cloth and clean the battery’s holder to avoid any sort of difficulty for the upcoming stage
3 – Put in the brand-new battery on your Peugeot model 402
In the case you did tasks well, you definitely will remember the old battery position. Place the brand-new battery in the corresponding position and attach the positive cable on the related space and then same for the negative cable.
Now your car should be working like the first day!
Now that your battery is changed, don’t put the used battery in the garbage or in the environment! This car product is very dangerous and it will probably be damageable for the environnement. Go recycling the battery or take it back in a garage!
Last update on 2019-02-22 / Affiliate links / Images from Amazon Product Advertising API