You will find there’s almost nothing more annoying than a battery situation. You leave out the lights on or there is a internal situation and your Chery model Tiggo 3 battery is dead! Not very convenient when you have activities to complete.
Hopefully, the battery substitute procedure is easy to do and the main genuine pain is getting the optimal battery for your Chery model Tiggo 3.
The battery replacing is very simple and it demands only three simple steps!
If you desire to obtain the greatest battery for your Chery model Tiggo 3 here some proposals that you can look for on Amazon, a respected website
- BUY ONLY GENUINE APC PRODUCTS! For genuine APC by Schneider Electric Products from the manufacturer, buy only if the product says "Ships from and sold by Amazon.com"
- Genuine APC replacement battery cartridges (RBC) are tested and certified for compatibility to restore UPS performance to the original specifications.
- Includes all required connectors, Battery recycling guide, Installation guide, Reusable packaging. Operating temperature-0° - 40 °C
- RBC 17 is compatible with many APC models including BE650BB, BE650G, BE650R, BE725BB, BE750G, BN600, BP700UC, DL650T, DL725VT and more. See product page for complete list.
- Note: Kindly refer the User Manual before use.Storage Temperature -15 - 45 °C
- CR 2032 replacement battery
- Easy to install
- Re-programming is not required
- 2 Pack
- Blister packaged to ensure battery remains fresh
- 90 day warranty - We test every remote and key fob to make sure it is functioning perfectly before it leaves our USA warehouse. We are so confident that we offer an Industry Leading 1 warranty on our keyless entry remote and key fob replacements. Why pay full retail for a new OEM key fob replacement when you can get ours at a fraction of the cost.
- This is Just a replacement shell for Toyota remotes that have Fcc#Hyq12bdm or Hyq12bel. (Electrics not included)
- PURCHASE WITH CONFIDENCE: No one knows Keyless entry & replacement Key Fob better than us. With over 250,000 remotes and happy customers and counting you can buy with confidence knowing you are getting the right part for you car. We also offer FREE USA based tech support with every order, if you have any questions we are here to help.
- Includes New Duracell battery inside!! Fits Fcc#Hyq12bdm or Hyq12bel.
- Compatibility: This Replacement Shell will fit remotes that fit 2012-2017 Toyota Camry Remote Key, 2014-2017 Toyota Corolla Remote Key
- Thoroughly engineered to meet or exceed your expectations for fit, form, and function
- Provides the performance and dependability you expect from ACDelco
- CR 2025 replacement battery
- Easy to install
- Re-programming is not required
- 5 Pack
- Blister packaged to ensure battery remains fresh
- Jumper cable for 12V Portable charger, Built-in 200Amp Fuse Protection
- Wire: 10 AWG silicone 0.08/1050 O.D. 5.0 Red Black; EC5 Male plastic shell blue, fits 5mm Banana plug.
- Replacement jump box cables, fits most brands of mini portable jump boxes, mobile chargers
- Use of car jump starter: 1)- connect the red battery clamp of jumper cable to the vehicle's positive (+) battery and connect the black to the negative (-) pole, 2)- Plug the cord of jumper cable into the jumper starter's socket, 3) - and start the vehicle
- Cautions: Do not reverse the operation sequence of jump starter; Do not use jump starter to start vehicle if the number of battery indicators are less then 3 to protect the jump starter from damage; Do remove the product from vehicle within 30 seconds after vehicle is started, or it may cause security incidents.
- Vinyl coated steel clamps
- Handle length is about 7-inches
- Conductors are copper plated steel
- For use with 6 and 12-volt batteries
- Recommended for 4,6, or 8 gauge cables
- Fully tested complete remote head key with a battery installed, tech support included with your purchase
- User programmable, step by step instructions included, two existing original keys are required If two existing original keys are not present or working dealer or locksmith programming is required
- Replaces OHT692427AA, KOBDT04A small and large button style keys
- KeylessOption warranty card Included with each purchase
- This is a replacement part to match the original in form and function
- Replacement jump box cables, fits most brands of mini portable jump boxes, car jump portable starters and mobile chargers.
- Support up to: 20000mAh Power bank at 600Amp Current. (
- Strong Alligator Clamp Clip with EC5 Plug Connector. Input/output: 12V. Wire guage:1015 10AWG.
- Use of car jump starter: 1)- connect the red battery clamp of jumper cable to the vehicle's positive (+) battery and connect the black to the negative (-) pole; 2)- Plug the cord of jumper cable into the jumper starter's socket; 3) - and start the vehicle.
- PAY ATTENTION PLEASE. When using this item, please be careful when using, this item can NOT be overload, check your device power before using please. Note: Please check your power bank if it can support your car.
Right after selecting your next battery, stick with these following points and you will certainly be all set once again with your car
Before getting rid of your battery, we want to remind you to park your car in a reliable place, emergency break on and be sure that the engine is off!
1 – Detach the battery wires
The battery is installed under the hood of your automobile. Pull out the hood release lever present on the vehicle driver area. Soon after you have access to the battery, you will identify that right now there is two cable connections on it. Be careful, there is one positive cable and one negative cable. You have to consider where these were located or you will be in a mess when setting back the fresh new battery on your car.
2 – Take out the previous battery of your Chery model Tiggo 3
Disassembling the old inactive battery from your car will not be a difficulty. Now that all cables are taken out, just remove the previous battery and that’s all. Be vigilant because batteries can be incredibly weighty. If you aren’t convinced about your power, support would probably be sweet.
In the event that you find out some dirt or any sort of other pollutants, take a cloth and remove the battery’s rack to prevent any type of difficulty for the upcoming point
3 – Add the brand-new battery on your Chery model Tiggo 3
In the case you managed to do tasks good, you will maintain in mind the previous battery position. Put the new battery in the exact position and join the positive cable on the matching place and same way for the negative cable.
Now your car should be working like the first day!
Once your battery is removed, don’t put the ancient battery in the trash or in the environment! This car part is very poisonous and it can be damageable for the environnement. Go recycle your battery or simply give it back in a garage!
Last update on 2019-02-22 / Affiliate links / Images from Amazon Product Advertising API